 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IXYS Features: * * * * * * * 3-60 V Operating Voltage Range Integrated 10-bit ADC 3 wire serial interface Microcontroller Compatible Low Power Minimum External Components TSOT-23 RoHS Compliant Package MX884 High-Side Current Monitor With 10-Bit Serial Digital Output General Description The MX884 targets power management applications where high noise immunity and low cost are primary requirements. Its integrated 10-bit ADC provides high resolution, making it ideal for current monitoring systems. The MX884 enables digital power management, in which a microcontroller can readily monitor the current in a system and perform other control functions in power systems and motion control products. The MX884 converts a small voltage developed across an external "current" sense resistor to a 10bit digital output. It features a wide common mode input supply voltage range of 3V to 60V and easily interfaces to most microcontrollers. The design is simple yet cost-effective, requiring very few external components, making it especially suitable for high volume applications. Applications: * * * * * Lighting Management Current Shunt Measurement Remote Sensing Battery Monitoring Microprocessor Controlled Power Management Ordering Information Qty Part No. Description MX884HTTR 6L TSOT23 Tape & Reel 3,000 Functional Block Diagram Typical Application Circuit (1 Amp full scale) MX884 Drawing No. 088423 1 12/20/06 www.claremicronix.com Preliminary MX884 Absolute Maximum Ratings TA = +25C unless otherwise noted, Voltages with respect to GND = 0V IXYS Unit V V V V C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and affect its reliability. Parameter Symbol Min Max IN Supply Voltage 70 LOAD 70 SCK, CS Input Voltage 6 SDO Open Drain Pull Up Voltage 6 Operating Temperature Range TA -40 +85 Storage Temperature Range TSTG -55 +150 Pin Description and Configuration Pin No. 1 2 3 4 5 6 Name SCK GND LOAD IN CS SDO Description Serial Clock Ground Load-Side Connection to the External Sense Resistor Positive Supply Terminal and Power Connection for the External Sense Resistor Chip Select (Active Low) Serial Data Output (Open Drain) DC Electrical Characteristics VIN = 5 V, T = +25C Parameter Operating Voltage Range (VIN) Supply Current Average A/D Reading Average A/D Reading Output Noise SCK pulse period SCK pulse width CS pulse period CS falling to first SCK rising Last SCK falling to CS rising SCK falling to SDO valid Condition ILOAD=0 10 mV Sense Voltage 100 mV Sense Voltage CS 10nF parallel RS=10 ohm Min 3 Typ 0.25 Max 60 Unit V mA LSB LSB RMS LSB S nS S nS nS nS 90 992 100 1000 1.5 110 1008 5 high or low 200 100 200 100 SDO falling SDO rising 80 Depends on SDO R, C MX884 Drawing No. 088423 2 12/20/06 www.claremicronix.com Preliminary MX884 Functional Description IXYS The MX884 converts a small voltage developed across an external sense resistor (Rs) to a 10-bit digital output. Pin IN connects to the 3V to 60V power input. The external current sense resistor connects between pins IN and LOAD. The nominal A/D range is 100 mV V(IN)-V(LOAD) across Rs. The A/D least significant bit typically equals 0.1 mV across Rs. Inputs CS and SCK are TTL-level compatible, 5.5V maximum input voltage. Inputs can be driven from CMOS microcontrollers operating at supply voltages of 2.4 to 5.5V. Serial data output pin SDO is configured as open drain, maximum 5.5V external pull-up. SCK is used internally to clock the successive approximation register of the A/D. Serial Timing Diagram MX884 Drawing No. 088423 3 12/20/06 www.claremicronix.com Preliminary MX884 TSOT-23 6 Lead IXYS IXYS Corporation makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS' Standard Terms and Conditions of Sale, IXYS Corporation assumes no liability whatsoever, and disclaims any expressed or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. MX884 Drawing No. 088423 4 12/20/06 www.claremicronix.com Preliminary IXYS IXYS Corporation 3540 Bassett Street Santa Clara, CA 925054 Tel: 1-408-982-0700 Fax: 1-408-496-0670 e-mail:sales@ixys.net Micronix An IXYS Company 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 World Wide Sales Offices United Kingdom IXYS Semiconductor Limited Langley Park Way Langley Park Chippenham Wiltshire SN 15 1GE - England Tel: 44-1249-444524 Fax: 44-1249-659448 sales@ixys.co.uk Sales Offices ASIA / PACIFIC Asian Headquarters IXYS Room 1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6368 bradley.green@ixys.co.uk Jhong@clare.com SALES OFFICES AMERICAS Eastern Region [Eastern North America, Mexico, South America] IXYS Corporation Beverly, MA Tel: 508-528-6883 Fax: 508-528-4562 wgh@ixys.net Central Region [Central North America] IXYS Corporation Greensburg, PA Tel: 724-836-8530 Fax: 724-836-8540 neil.lejeune@westcode.com Western Region [Western North America] IXYS Corporation Solana Beach, CA Tel: 858-792-1101 slodor@ix.netcom.com SALES OFFICES EUROPE European Headquarters IXYS Semiconductor GMBH Edisonstrasse 15 D- 68623 Lampertheim Germany Tel : 49-6206-503203 Fax: 49-6206-503286 marcom@ixys.de http://www.claremicronix.com IXYS cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this IXYS product. No circuit patent licenses nor indemnity are expressed or implied. IXYS reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: MX884 (c)Copyright 2006, IXYS Corporation All rights reserved. Printed in USA. MX884 Drawing No. 088423 5 12/20/06 www.claremicronix.com Preliminary |
Price & Availability of MX884
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |